How to tune to TWR Audio Channel 48 on VIVID

Press the MENU button.
Push the down arrow until installation is highlighted and push the OK button.
Enter the PIN which is 1379.
The dish Install is highlighted. Push OK.
Push the down arrow to highlight SIGNAL SETUP. Push OK.
You will now see "Signal 1" is highlighted.
Push the right arrow until "Signal 4" is highlighted and then push OK.
By using the arrow keys and numbers, enter the following:
Signal Source: Enable
LMB: 1
Frequency: 11 090
Symbol Rate: 27 500
Polarization: vertical
FEC: 5/6
Once all the items are entered, push OK. Then push EXIT. Signal Setup should now be highlighted.
Push the down arrow once to highlight Tune DSD and push OK.
The scanning will now start, looking for all new services. This will take 3 minutes to complete.

Trans World Radio on VIVID

TWR Channel 55 is also available free-to-air on the Vivid Decoder system public bouquet. There are no monthly charges or annual maintenance fees.

How to purchase a VIVID free-to-air option

Purchase a Vivid Decoder and Satellite dish from a satellite installation dealer.
Install the dish and decoder.
Follow the instructions on the reverse side of the leaflet.
Connect to your television and/or sound system.
Follow steps on the right.

Switching Between Bouquets

Press the Guide button - this will bring up the main menu.

Press the blue ALT button - this will take you to the menu line where you can select the different bouquets. The VIVID bouquets should be highlighted.

Use the right cursor buttons, to go accross to the Public Bouquet and press the OK button - wait for a minute or so while the green part of the screen slowly fills with information.

Press the button - this will now change to show all the radio channels.

Now use the Cursor Up / Down button, to find the Trans World Radio satellite radio channel. The channel number, at present, is 48 (this number might change from time to time). Press OK and you will hear TWR.